# n2-Photonics


## Pages

- [kopie-von-trouble-shooting-ids-peak](https://n2-photonics.de/kopie-von-trouble-shooting-ids-peak/): error (-5001 : 0x80070002) during installation of IDS peak Trouble Shooting for Beam Inspector Problem Solution Reboot the PC Make sure all windows updates are installed properly and no updates are pending Make sure that the system time is set correctly The issue could be caused by some corrupt files, please run the windows system file checker and download IDS peak again from here
- [trouble-shooting-library](https://n2-photonics.de/trouble-shooting-library-not-found/): Library not found: C:/(…)/GCBase_MD_VC140_v3_2_IDS.dll Trouble Shooting for Beam Inspector Problem IDS peak not installed Solution Make sure that the IDS peak software suite is installed. It contains the drivers for the camera. You can download a tested IDS peak version from here
- [trouble-shooting-usb-bandwidth-too-low](https://n2-photonics.de/trouble-shooting-usb-bandwidth-too-low/): USB bandwidth too low (USB 2.0 instead of USB 3.0) Trouble Shooting for Beam Inspector Problem USB bandwidth too low (USB 2.0 instead of USB 3.0)​​​​​​​​​​​​​​​ Solution Make sure the USB port the camera is connect to can run at USB 3.0 5 gbit/s bandwidth Connect the camera directly to the PC with the supplied cable. No USB hubs, no USB extenders, no USB extension cables Try a different USB port Try a different PC with USB 3.0 ports
- [Privacy-policy](https://n2-photonics.de/privacy-policy/): Privacy Policy 1) Information on the Collection of Personal Data and Contact Details of the Controller 1.1 We are pleased that you are visiting our website and thank you for your interest. In the following, we inform you about the handling of your personal data when using our website. Personal data is all data with which you can be personally identified. 1.2 The controller in charge for data processing on this website within the meaning of the General Data Protection Regulation (GDPR) is n2-Photonics GmbH i.G. Hans-Henny-Jahnn-Weg 53, 22085 Hamburg, Deutschland, Tel.: +49 40 6077 3472 0, E-Mail: info@n2-photonics.de. The controller in […]
- [Lamiks](https://n2-photonics.de/lamiks/): Ready-to-go laser system LAMIKS​ Here, we present our turn-key laser system integrated in one box. Over the last few years, we have gained a lot of experience upgrading and testing different femtosecond lasers. See our showcases. Depending on your technical requirements, we can select a driver laser for you and integrate everything in one box. The box can have multiple outputs, including the original laser output, shortened output pulse duration (<7-50 fs), and even a second harmonic output.  Please send us your request; we can quickly arrange a video call and review your application and requirements. PERFORMANCE​ Pulse duration: <100 fs; […]
- [Miks12](https://n2-photonics.de/miks12/): Double Stage Unit MIKS12 Compatible with any repetition rate and pulse-on-demand laser system Stable 24/7 operation Simple integration with existing laser systems No active optical elements No mechanically moving components No maintenance required Runs in harsh environments (e.g. dust or vibration) PERFORMANCE​ Up to 10x shorter pulses (<20-50 fs) From 1 μJ to 500 μJ input energy Over 100 W average power FEATURES Over 90% transmission 24/7 operation No maintenance Small footprint: 80 x 80 cm² (MIKS12) 150 x 35 cm² (MIKS12_long) Beam height: 105 mm Ready-to-go pulse compression Output spectrum Far field beam profile SPIDER Measurement Beam position stability […]
- [Miks1-l](https://n2-photonics.de/miks1-l/): Single Stage Unit MIKS1_L Compatible with any repetition rate and pulse-on-demand laser systems Stable 24/7 operation Simple integration with existing laser system No active optical elements No mechanically moving components No maintenance required Runs in harsh environments (e.g. dust or vibration) PERFORMANCE​ Up to 10x shorter pulses (<45 fs) From 500 μJ to 4 mJ input energy Over 200 W average power FEATURES Over 90% transmission 24/7 operation No maintenance Footprint: (90 -230) x 24 cm² Beam height: 115 mm Ready-to-go pulse compression Input spectrum vs. output spectrum Input spectrum vs. output spectrum Output beam profile
- [Miks1-m](https://n2-photonics.de/miks1-m/): Single Stage Unit MIKS1_M Compatible with any repetition rate and pulse-on-demand laser system Stable 24/7 operation Simple integration with existing laser systems No active optical elements No mechanically moving components No maintenance required Runs in harsh environments (e.g. dust or vibration) PERFORMANCE Up to 10x shorter pulses (<20-50 fs) Up to 500 μJ input energy Over 100 W average power   FEATURES Over 90% transmission 24/7 operation No maintenance Small footprint: 60 x 25 cm² Adjustable beam height: >90 mm Ready-to-go pulse compression Output spectrum Output spectrum Output autocorrelation Beam position stability Average power stability All measurements shown in this […]
- [Miks1-s](https://n2-photonics.de/miks1-s/): Single Stage Unit MIKS1_S Single-stage multipass spectral broadening and compression unit (MIKS1_S) Compatible with any repetition rate and pulse-on-demand laser system Stable 24/7 operation Simple integration with existing laser systems No active optical elements No mechanically moving components No maintenance required Runs in harsh environments (e.g. dust or vibration) PERFORMANCE Up to 10x shorter pulses (<20-50 fs) From 1 μJ to 200 μJ input energy Over 100 W average power   FEATURES Over 90% transmission 24/7 operation No maintenance Small footprint: 42 x 25 cm² Adjustable beam height: >90 mm Ready-to-go pulse compression Output spectrum Beam position stability Average power […]
- [Career](https://n2-photonics.de/career/): Wanna join our team? We’re always looking for passionate future teammates who share our fascination for laser technology. We’re constantly expanding and seeking out bright minds.​ Send us your proactive applications! Apply Now Open Job Offers Laser Engineer YOUR ROLE To match our dynamic, innovative atmosphere, we are currently seeking a highly motivated, ambitious new team member.Your responsibilities will include (but are not limited to): Your master project would be about: product development simulating and realizing customized pulse compression modules project coordination customer support / after-sales service ABOUT YOU Being a problem solver and analytical thinker Obtained a Master’s degree […]
- [Beaminspector](https://n2-photonics.de/beaminspector/): Free Laser Beam Profiler Software Open Source Project Beam Inspector C. Franke, K. Fritsch, O. Pronin , N. Chunosov Problem We regularly need to measure the laser beam profile of femtosecond lasers in the lab at each workstation. This beam characterization is necessary to ensure that the mode-matching of our multipass cells fits accurately to our customers’ lasers. Additionally, we frequently include beam profilers with our modules as a useful tool to facilitate the remote installation of our pulse shortening (MIKSs) modules. Unfortunately, ordering a new commercial-grade laser beam profiler in every case is not affordable, and the full feature […]
- [Literature](https://n2-photonics.de/literature/): Overview of research work from us and our customers We have demonstrated the benefits of our core technology in numerous peer-reviewed publications. Carrier-envelope phase-stable few-cycle pulses from two stage hybrid compression of a Yb:KGW amplifier Dipendra Khatri, Tran-Chau Truong, Chelsea Kincaid, Christopher Lantigua and Michael Chini Journal of Optics, Volume 27, Number 1 (2024) http://dx.doi.org/10.1088/2040-8986/ad9e00 Go to paper Carrier-envelope phase-stabilized ultrashort pulses from a gas-filled multi-pass cell Dipendra Khatri, Tran-Chau Truong, Christopher Lantigua, Chelsea Kincaid, Mathew Britton, and Michael Chini Appl. Phys. Lett. 125, 094103 (2024) https://doi.org/10.1063/5.0216853 Go to paper Excellent research is coming Ambitions authors Sci-Hub Go to paper […]
- [Imprint](https://n2-photonics.de/imprint/): Imprint Information according to § 5 TM n2-Photonics GmbH Hans-Henny-Jahnn-Weg 5322085 Hamburg Represented by: Christian Franke Kilian Fritsch Oleg Pronin Contact Telefon: +49 40 6077 3472 0 E-Mail: info@n2-photonics.de Register court: Hamburg Local CourtRegister number: HRB 174837 Sales tax identification number according to § 27 a Umsatzsteuergesetz: DE352213469 Editorially responsible Christian Franke Consumer dispute resolution/universal arbitration board​ We are not willing or obligated to participate in dispute resolution proceedings before aconsumer arbitration board. Limitation of liability for internal content The content of our website has been compiled with meticulous care and to the best of our knowledge. However, we cannot assume […]
- [Useful](https://n2-photonics.de/useful/): Useful​ Here you will find publications describing our laser pulse compression technology as well as useful tools for your daily work in the lab​​​ Literature Laser Beam Profiler
- [Laser glass micromachining with 50 fs](https://n2-photonics.de/laser-glass-micromachining-with-50-fs/): Basic Investigations on Laser Micromachining of Glass with sub 100 fs Pulses and an Industrial Grade Laser SystemWhite Paper B. Neuenschwander¹, Ch. Nussbaum¹, S. M. Remund¹, A. Malki1, C. Franke², K. Fritsch², D. Ballukonis³, U. Hoechner³ ¹ Institute for Applied Laser, Photonics and Surface Technologies ALPS² n2-Photonics ³ Light Conversion​ Download Full White Paper PROBLEM For a long time, the sub-100 fs regime was only accessible with Ti: Sapphire laser systems. These laser systems enabled a lot of proof-of-principle experiments in research laboratory environments. However, real-world applications in industry were taken over by more reliable and economical Yb-based femtosecond lasers, […]
- [Application](https://n2-photonics.de/application/): Applications Many applications from research to industry benefit from our technology Material Processing Surface micro and nano-structuring  Glass processing Silicon ablation Laser lithography Multi-photon polymerization  In the first proof-of-principle experiments, we empirically show that the ablation of transparent materials benefits from shorter pulses of sub-100 fs. Find Out More Data Sheet Research & Development Ultrafast pump-probe spectroscopy High harmonic and XUV generation Attosecond pulse generation Electro-optic sampling Ultra-broadband infrared radiation generation s-SNOM nanoscopy and microscopy OPA pumping Microscopy Nonlinear microscopy Three-photon microscopy CARS microscopy Two-photon microscopy Second harmonic generation (SHG) microscopy
- [Contact Us](https://n2-photonics.de/contact-us/): Contact Us Krausestraße 102 22049 Hamburg Germany info@n2-photonics.de +49 40 6077 3472 0 Are you interested in testing one of our products for free? We are happy to develop a custom-inspired product. Simply drop us an email! Send Us a Message
- [About Us](https://n2-photonics.de/about-us/): Our Team​ We love to solve problems. We are strongly driven to enable new applications with our product. Our team brings together the full range of expertise: physics, engineering and business. Kilian Fritsch I carried out research with femtosecond thin-disk oscillators and their pulse compression techniques as part of my PhD work at Ludwig-Maximilians University and Helmut-Schmidt-University. My main research focus was the development of power-scalable and efficient methods for nonlinear spectral broadening and pulse compression. Based on my experience in the field of spectral broadening and pulse compression, I am focused on the continued development of our core technology:​ […]
- [Showcases](https://n2-photonics.de/show-cases/): Showcases Our add-on pulse compressors are compatible with different ultrafast industrial lasers. Here we experimentally prove this compatibility and demonstrate outstanding performance. MIKS1_L_HP (45 fs)@ Carbide (2 mJ, 80 W)(Light Conversion) MIKS1_XL ( 30 fs )@ Pharos (4 mJ, 20 W)(Light Conversion) MIKS1_XS ( 10 fs)@ FLINT (5 W)(Light Conversion) MIKS1_S@ Pharos(Light Conversion)  MIKS1_S@ Monaco(Coherent) MIKS1_S@ Tangor(Amplitude)  MIKS1_S@ Satsuma(Amplitude) MIKS1_S@ TruMicro 2030(Trumpf Laser) MIKS1_S@ DIRA 200-100(Trumpf Scientific Lasers) MIKS1_S@ FemtoFiber vario 1030(TOPTICA Photonics) MIKS1_S@ neoMOS SMAART(neoLASE) MIKS1_S@ INDYLIT 10(Litilit) MIKS1_S@ Carbide(Light Conversion) MIKS1_S@ FemtoLux 30(EKSPLA) MIKS1_S@ FX-Series(Edge Wave) MIKS1_S@ FemtoLux 30(EKSPLA) MIKS1_L@ A2000(Amphos) MIKS1_L@ Pharos(Light Conversion) MIKS12@ Pharos(Light Conversion) MIKS12_UP […]
- [Products](https://n2-photonics.de/products/): Products We offer different add-on modules (MIKSs) to spectrally broaden and temporally shorten your pulses. The output pulses duration strongly depends on the input pulse duration. // Input energy Input pulse duration Maximum average power Compression factor Efficiency Output pulse duration Beam positional stability Average power stability Footprint MIKS1 S MIKS1 M MIKS1 L MIKS12 MIKS12_UP 1 – 200 μJ 200 – 500 μJ 500 µJ – 4 mJ 10 – 400 μJ 100 fs – 3 ps Over 200 W (HP-version: >50 W) Up to 15 x Up to 10 x 15 – 30 x 15 – 45 x […]
- [Home](https://n2-photonics.de/): Linkedin Youtube https://www.youtube.com/watch?v=JF4FhB1_E40 Enabling new applications with ultrashort laser pulses SPIE Photonics West. Booth 2360. We bring our product to San Francisco and let it run together with a Pharos laser and PulseCheck autocorrelator on the fairground floor.  Witness compressed pulses at our booth (#2360). Photonics West – 17.01 – 22.01.2026 Find Out More SPIE Photonics West. Booth 2360. We bring our product to San Francisco and let it run together with a Pharos laser and PulseCheck autocorrelator on the fairground floor.  Witness compressed pulses at our booth (#2360). Photonics West – 17.01 – 22.01.2026 Find Out More Extremely robust […]


[comment]: # (Generated by Hostinger Tools Plugin)